Specifications

Startup and General Configuration Summary
Configuring CDP
SecureStack A2 Configuration Guide 2-113
2.1.17 Configuring CDP
Purpose
To review and configure the CDP discovery protocol.
Commands
The commands used to review and configure the CDP discovery protocol are listed below and
described in the associated section as shown.
• show cdp (Section 2.1.17.1)
• set cdp state (Section 2.1.17.2)
• set cdp auth (Section 2.1.17.3)
• set cdp interval (Section 2.1.17.4)
• set cdp hold-time (Section 2.1.17.5)
• clear cdp (Section 2.1.17.6)