Specifications

Startup and General Configuration Summary
Managing Switch Configuration and Image Files
SecureStack A2 Configuration Guide 2-109
2.1.16.10 set tftp timeout
Use this command to configure how long TFTP will wait for a reply of either an acknowledgement
packet or a data packet during a data transfer.
set tftp timeout seconds
Syntax Description
Command Mode
Read-Write.
Command Defaults
None.
Example
This example sets the timeout period to 4 seconds.
seconds Specifies the number of seconds to wait for a reply. The
valid range is from 1 to 30 seconds. Default value is 2
seconds.
A2(rw)->set tftp timeout 4