Specifications

Startup and General Configuration Summary
Managing Switch Configuration and Image Files
SecureStack A2 Configuration Guide 2-99
2.1.16.1 show snmp persistmode
Use this command to display the configuration persistence mode setting. By default, the mode is
set to “auto save,” which automatically saves configuration changes at specific intervals. If the
mode is set to “manual,” configuration commands are never automatically saved. In order to make
configuration changes persistent when the mode is manual, the save config command must be
issued as described in Section 2.1.16.3.
show snmp persistmode
Syntax Description
None.
Command Defaults
None.
Command Mode
Read-Only.
Example
This example shows how to display the configuration persistence mode setting. In this case,
persistence mode is set to “manual”, which means configuration changes are not being
automatically saved.
:
A2(su)->show snmp persistmode
persistmode is manual