Specifications

Startup and General Configuration Summary
Downloading a New Firmware Image
2-88 SecureStack A2 Configuration Guide
2.1.14.2 Downloading via the Serial Port
To download switch firmware via the serial (console) port, proceed as follows:
1. With the console port connected, power up the switch. The following message displays:
2. Before the boot up completes, type 2 to select “Start Boot Menu”. Use “administrator” for the
Password.
Enterasys A2-Series Boot Code...
SDRAM Circuit Test of 256MB
100%
Version 1.0.13 6/14/2004
Computing MD5 Checksum of operational code...
Select an option. If no selection in 2 seconds then
operational code will start.
1 - Start operational code.
2 - Start Boot Menu.
Select (1, 2):2
Password: *************
NOTE: The above “Boot Menu” password “administrator” can be changed using boot menu
option 10.