Specifications

Startup and General Configuration Summary
Configuring Power over Ethernet (PoE)
2-82 SecureStack A2 Configuration Guide
2.1.13.1 show inlinepower
Use this command to display switch PoE properties.
show inlinepower
Syntax Description
None.
Command Defaults
None.
Command Mode
Read-Only.
Example
This example shows how to display switch PoE properties. In this case, only units 2, 4, and 8 are
PoE units, so their power configurations display:
A2(rw)->show inlinepower
Unit Status Power(W) Consumption(W) Usage(%) Threshold(%) Trap
---- ------ -------- -------------- -------- ------------ ----
2 auto 360 0.00 0.00 80 enable
4 auto 360 0.00 0.00 80 enable
8 auto 360 5.20 1.44 80 enable