Specifications

Startup and General Configuration Summary
Setting Basic Device Properties
SecureStack A2 Configuration Guide 2-75
2.1.12.24 set width
Use this command to set the number of columns for the terminal connected to the switch’s console
port. The length of the CLI is set using the set length command as described in Section 2.1.12.25.
set width screenwidth [default]
Syntax Description
Command Defaults
None.
Command Mode
Read-Write.
Example
This example shows how to set the screen width to 150:
screenwidth Sets the number of terminal columns.
Valid values are 50 to 150.
default (Optional) Makes this setting persistent for all future
sessions (written to NV-RAM).
A2(rw)->set width 150