Specifications

Startup and General Configuration Summary
Setting Basic Device Properties
2-72 SecureStack A2 Configuration Guide
2.1.12.21 set system name
Use this command to configure a name for the system.
set system name [string]
Syntax Description
Command Defaults
If string is not specified, the system name will be cleared.
Command Mode
Read-Write.
Example
This example shows how to set the system name to Information Systems:
string (Optional) Specifies a text string that identifies the system.
NOTE: A name string containing a space in the text
must be enclosed in quotes as shown in the example
below.
A2(rw)->set system name “Information Systems”