Installation guide

Installing Optional Mini-GBICs
3-4 Hardware Installation
Installation
ToinstallaMini‐GBICthathasanRJ45connector,refertoFigure 3‐1;foraMini‐GBIC
withaMT‐RJconnector,refertoFigure 3‐2;foraMini‐GBICwithanLCconnector,refer
toFigure 3‐3;andproceedasfollows:
1. HoldtheMini‐GBICwiththetop
sidepositionedasshown,andthe7‐pinedge
connectorfacingtheportslot.
2. Align theMini‐GBICwiththeportslot.
3. Ifyouare usingtheRJ45Mini‐GBICasinFigure 3‐1,besurethereleasetabisinthe
upposition.
4. PushtheMini‐GBICintotheport
slotuntiltheMini‐GBIC“clicks”andlocksinto
place.
Figure 3-1 Mini-GBIC with RJ45 Connector
1 SFP Slot 3 Release tab
2 Mini-GBIC
(MGBIC-02) 4 Link/Activity LED
27
28
A2H124-24FX
25
26
27
28
25/Up 26/Down
Stack
Â
Á
À
Ã