Specifications

Enterasys RoamAbout Wireless
Management Module Guide
Page 9
Document 5005
Firmware Information
This management module was tested against RoamAbout AP firmware
V6.00.04, RoamAbout R2 firmware V2.00.16, and IEEE 802.11 compliant
devices.
SNMPv3 Support
SPECTRUM version 6.6 and the RoamAbout R2 device both support
SNMPv3. By default, RoamAbout R2 devices are configured to
communicate using SNMPv3. This default configuration provides only
limited access to MIB II system information via SNMPv1. SPECTRUM will
discover and model this device via SNMPv1, however the device model will
not be able to create associated models to provide full support of the
device. To resolve this, either reconfigure the R2 to allow full SNMPv1
communication or enable SPECTRUM's SNMPv3 support. To reconfigure the
R2 device, refer to the Enterasys RoamAbout R2 device documentation. For
more information about SPECTRUM’s SNMPv3 support, see the SPECTRUM
SNMPv3 User Guide (5124).