Specifications

Enterasys RoamAbout Wireless
Management Module Guide
Page 18
Document 5005
RoamAbout R2 Support
This section describes the device-specific views accessible
from the Icon Subviews menu of the Device icon for
models of RoamAbout R2 devices.
Note: See the vendor’s device firmware guide for more
details about RoamAbout R2 MIB support:
http://www.enterasys.com/roamabout
.
In This Section
Wireless Status Views
Hardware Status Views [Page 24]
NetSight Element Manager [Page 28]
Wireless Status Views
Filtering Information View
Note: From the Icon Subviews menu for the Device icon,
select Wireless Status > Filtering.
This view provides information about the status of the
wireless network.
Protocol-Based Filtering/VLAN Table
This table provides information about protocol-based filtering and VLAN
assignment. Each row in the Protocol-Based Filtering/VLAN Table
holds
filtering instructions, or VLAN classification instructions, for one port/
protocol pair. Each entry is indexed by ReceivePort | Type | Index
.
ReceivePort | Type | Index
• The first integer identifies the receive port to which the protocol filter is
to be applied. The value
0 represents “all ports.”
• The second integer identifies the protocol type. The switch chip in the
RoamAbout R2 can recognize nine predefined high-level protocol types,
and up to three user-defined EtherTypes. (Some or all EtherType filters
may be reserved for use in implementing other features.) Protocol
types are as follows: