Specifications

Enterasys RoamAbout Wireless
Management Module Guide
Page 17
Document 5005
RoamAbout AP Manager
This section describes how to set up SPECTRUM to gain
access to the RoamAbout Access Point Manager software
manufactured by Enterasys Networks.
RoamAbout Access Point Manager provides further configuration and
management capabilities for multiple RoamAbout Access Points. You can
access this optional product from the Icon Subviews menus (via the
Device, Topology, Application, and Off Page Reference icons) of the
RoamAboutAP model once you have followed the Setup Instructions
below.
Note: This product is only available on the Windows
platform. For more information see:
http://www.enterasys.com/roamabout
Setup Instructions
The RoamAbout Access Point Manager should be installed according to the
manufacturer’s instructions on the same system that contains
SpectroGRAPH.
1. Shut down SpectroGRAPH.
2. In Windows 2000, go to Start -> Settings -> Control Panel.
3. Double click the System icon.
4. Select the Advanced tab.
5. Click the Environment Variables button.
6. Add the following to the system variables:
Variable Type: ROAMEXCPATH
Value Type: <RoamAbout Access Point Manager install path>
7. Click OK.
8. Click OK.
9. Start SpectroGRAPH.
The RoamAbout Access Point option should now be available on the Icon
Subviews menus accessed via the Device, Topology, Application, and Off
Page Reference icons.