Specifications

Enterasys RoamAbout Wireless
Management Module Guide
Page 16
Document 5005
Crash Upload Use Bootp
This button controls where the Access Point gets the information it needs
to upload crash dumps. The value
true indicates that the Access Point
should use the BootP protocol to autoconfigure such parameters as its own
IP address, gateway IP, subnet, TFTP server IP address, and directory
name. The value
false indicates that the Access Point should use locally
configured parameters stored in NVRAM.
Crash Upload Server IP
The IP address of the TFTP server that should be used for crash dump
uploads. This value will be ignored when the Crash Upload Use Bootp
button is set to
false.
Crash Upload Directory
The name of the remote directory to which all crash dumps should be
uploaded. This value will be ignored when the Crash Upload Use Bootp
button is set to
false.