Specifications

Enterasys RoamAbout Wireless
Management Module Guide
Page 15
Document 5005
RoamAbout MIB Dot 11 Future View
Note: From the Icon Subviews menu for the
RoamAboutAP Device icon, select RoamAbout
MIB > Dot 11 Future.
This view provides the same field names as the
RoamAbout MIB Dot 11 Current View
[Page 13] but the
values relate to future rather than current channel
communication frequency.
RoamAbout MIB Loader View
Note: From the Icon Subviews menu for the
RoamAboutAP Device icon, select RoamAbout
MIB > RoamAbout Loader.
This view provides Access Point firmware information and
download controls via the following fields and buttons.
Firmware Use Bootp
This button controls where the Access Point gets the information it needs
to download new firmware. The value
true indicates that it should use the
BootP protocol to autoconfigure such parameters as its own IP address,
gateway IP, subnet, TFTP server IP address, and file name. The value
false indicates that it should use locally configured parameters stored in
NVRAM.
Firmware Server IP
A read-write field specifying the IP address of the TFTP server that should
be used for firmware downloads. This value will be ignored when the
Firmware Use Bootp button is set to
false.
Firmware Filename
A read-write field specifying the name of the remote file that contains the
firmware to be downloaded. This value will be ignored when the Firmware
Use Bootp button is set to
false.
Firmware Status
Displays generic status codes that indicate the success or failure of the
Access Point’s most recent attempt to download new firmware.