Specifications

Enterasys RoamAbout Wireless
Management Module Guide
Page 13
Document 5005
Remote Station Name
A read-only field that displays the wireless station name of the remote
station participating in the point-to-point diagnostic test.
Remote Signal Level
A read-only field that displays the last remote signal level value obtained
from the point-to-point diagnostic test. A value of
0 is displayed if the last
sample was not valid.
Remote Noise Level
A read-only field that displays the last remote noise level value obtained
from the point-to-point diagnostic test. A value of
0 is displayed if the last
sample was not valid.
Interval
A read-write field that controls PTP sampling. Entering a value of
1 causes
a single PTP sample to be performed.
Local Signal Level
A read-only field that displays the last local signal level value obtained from
the point-to-point diagnostic test. A value of
0 displays if the last sample
was not valid.
Local Noise Level
A read-only field that displays the last local noise level value obtained from
the point-to-point diagnostic test. A value of
0 displays if the last sample
was not valid.
RoamAbout MIB Dot 11 Current View
Note: From the Icon Subviews menu for the
RoamAboutAP Device icon, select RoamAbout
MIB > Dot 11 Current.
This view provides the following information.
Network Name
The current network name.
Station Name
The current station name of the radio interface used by client utilities.