Specifications

Configuring and Managing Ports
RoamAbout Mobility System Software Configuration Guide 4-5
Example
Tocleartheport‐relatedsettingsfromport1andresettheportasanetworkport,typethe
followingcommand:
RBT-8100# clear port type 1
This may disrupt currently authenticated users. Are you sure? (y/n) [n]y
success: change accepted.
Clearing a Distributed DAP
ToclearaDistributedDAP,usethefollowingcommand:
clear dap dap-num
Configuring a Port Name
EachRoamAboutSwitchporthasanumberbutdoesnothaveanamebydefault.
Setting a Port Name
Tosetaportname,usethefollowingcommand:
set port port name name
Youcanspecifyonlyasingleportnumberwiththecommand.
Example
Tosetthenameofport1toadminpool,typethefollowingcommand:
RBT-8100# set port 1 name adminpool
success: change accepted.
Removing a Port Name
Toremoveaportname,usethefollowingcommand:
clear port port-list name
Note: When you clear a Distributed DAP, MSS ends user sessions that are using the DAP.
Note: To avoid confusion, Enterasys Networks recommends that you do not use numbers as port
names.