Specifications

Administrative AAA Configuration Scenarios
2-8 Configuring AAA for Administrative and Local Access
Opening the QuickStart Network Plan in RASM
RoamAboutSwitchManagercomeswithtwosamplenetworkplans:
• QuickStart—Containsatwo‐floorbuildingwithtwoRoamAboutSwitchesandtwo
RoamAboutAccessPointsoneachswitch.EachswitchanditsAPsprovidecoveragefora
floor.TheRoamAboutequipmentisconfiguredtoprovidebothclear(unencrypted)and
secure(802.1X)wireless
access.
• StarterKit—Containsasimplerectangleasafloorplan,butwithoneRoamAboutSwitchand
fourRoamAboutAccessPoints.YoucanmodifythisplantodeploytheRoamAboutstarter
kit.
TheQuickStartnetworkplancontainsaconfigurationsimilartotheonecreatedbytheCLI
quicktstartexamplein“QuickstartExample”on
page 2‐5.Theplandiffersfromthesample
configurationbyusingseparateVLANsforRoamAboutSwitchmanagementtraffic,corporate
users,andguestusers.Otherwise,theconfigurationisthesame.
Toopenthenetworkplan:
1. InstallRASM,ifnotalreadyinstalled.(Seethe“GettingStarted”chapteroftheRoamAbout
SwitchManagerUser’s
Guideorthe“InstallingRASM”chapteroftheRoamAboutSwitch
ManagerReferenceManual.)
2. StartRASMbydoingoneofthefollowing:
a. OnWindowssystems,selectStart>Programs>Enterasys Networks>RASM>RASM,
ordouble‐clicktheRASMicononthedesktop.
b. OnUNIXandLinuxsystems,changedirectoriesto
RASM_installation_directory/bin,and
enter./RoamAbout.
IfyouarestartingRoamAboutSwitchManagerforthefirsttime,oryouhavenotenteredlicense
informationpreviously,theLicenseInformationdialogboxappears.Entertheserialnumberand
License,thenclickOK.
3. WhentheRoamAboutSwitchManagerServicesConnectiondialogappears,entertheIP

addressandUDPportofRoamAboutSwitchManagerServices(ifinstalledonadifferent
machinethantheclient),andclickNext.
4. IftheCertificateCheckdialogappears,clickAccepttocompletetheconnectiontoRoamAbout
SwitchManagerServices.
5. SelectFile>SwitchNetworkPlan.
6. ClickYestoclosetheplanthat
iscurrentlyopen.
TheSwitchNetworkPlandialogappears,listingtheavailablenetworkplans.
7. SelectQuickStartandclickNext.