Specifications

Enterasys Networks Vendor-Specific Attributes
RoamAbout Mobility System Software Configuration Guide C-5
Enterasys Networks Vendor-Specific Attributes
Thevendor‐specificattributes(VSAs)createdbyEnterasys Networksareembeddedaccordingto
theprocedurerecommendedinRFC 2865,withVendor‐IDsetto14525.Table C‐2describesthe
Enterasys NetworksVSAs,listedinorderbyvendortypenumber.
(Forattributedetails,seeTable 17‐5onpage 17‐42.)
Event-
Timestamp
55 No No Yes Time that the user session started, stopped, or
was updated, in seconds since January 1,
1970.
Tunnel-
Private-Group-
ID
81 Yes No No Same as VLAN-Name.
NAS-Port-Id 87 No Yes Yes RAS physical port that authenticates the user, in
the form AP port number/radio.
Table C-1 801.1X Attributes (continued)
Attribute Type
Rcv in
Access
Resp?
Sent in
Access
Reqst?
Sent in
Acct
Reqst?
Description and Values
Table C-2 Enterasys Networks VSAs
Attribute
Type,
Vendor
ID, Vendor Type
Rcv in
Access
Resp?
Sent in
Access
Reqst?
Sent in
Acct
Reqst?
Description
VLAN-Name 26, 14525, 1 Yes No Yes Name of the VLAN to which the
client belongs.
Mobility-Profile 26, 14525, 2 Yes No No Name of the Mobility Profile used
by the authorized client.
Encryption-Type 26, 14525, 3 Yes No No Type of encryption used to
authenticate the client.
Time-Of-Day 26, 14525, 4 Yes No No Day(s) and time(s) during which
a user can log into the network.
SSID 26, 14525, 5 Yes No Yes Name of the SSID you want the
user to use. The SSID must be
configured in a service profile,
and the service profile must be
used by a radio profile assigned
to Enterasys radios in the
Mobility Domain.
End-Date 26, 14525, 6 Yes No No Date and time after which the
user is no longer allowed to be
on the network. Use the following
format:
YY/MM/DD-HH:MM