Specifications

Supported Standard and Extended Attributes
RoamAbout Mobility System Software Configuration Guide C-3
State 24 Yes Yes No Can be sent by a RADIUS server in an Access-
Challenge message to the RAS. If the RAS
receives an Access-Challenge with this
attribute, it returns the same State value in an
Access-Request response to the RADIUS
server, when a response is required. (For
details, see RFC 2865.)
Class 25 Yes No Yes If received, this information must be sent on,
without interpretation, in all subsequent packets
sent to the RADIUS server for that client
session.
Vendor-
Specific
26 Yes No Yes String. Allows MSS to support Enterasys VSAs.
(See Table C-2 on page C-5.)
Session-
Timeout
27 Yes No Optional Maximum number of seconds of service
allowed the user before reauthentication of the
session.
Note: If the global reauthentication timeout (set
by the set dot1x reauth-period command) is
shorter than the session-timeout, MSS uses the
global timeout instead.
Called-Station-
Id
30 No Yes Yes For IEEE 802.1X authenticators, stores the AP
MAC address in uppercase ASCII format, with
octet values separated by hyphens (for
example, 00-10-A4-23-19-C0).
Calling-Station-
Id
31 No Yes Yes For IEEE 802.1X authenticators, stores the
supplicant MAC address in uppercase ASCII
format, with octet values separated by hyphens
(for example, 00-10-A4-23-19-C0).
NAS-Identifier 32 No Yes No Name of the RADIUS client originating an
Access-Request. The value in the current
release is Enterasys and cannot be changed.
Acct-Status-
Type
40 No No Yes Valid values:
• Acct-Start
• Acct-Interim-Update
• Acct-Stop
Acct-Delay-
Time
41 No No Yes Time in seconds for which the client has been
trying to send the record.
Acct-Input-
Octets
42 No No Yes Number of octets received from the port over
the course of this service being provided. Can
be present only in Accounting-Request records
in which Acct-Status-Type is set to Acct-Stop or
Acct-Interim-Update.
Table C-1 801.1X Attributes (continued)
Attribute Type
Rcv in
Access
Resp?
Sent in
Access
Reqst?
Sent in
Acct
Reqst?
Description and Values