Specifications

RoamAbout Mobility System Software Configuration Guide C-1
C
Supported RADIUS Attributes
Enterasys NetworksMobilitySystemSoftware(MSS)supportsthestandardandextended
RADIUSauthenticationandaccountingattribu teslistedinTable C‐1onpage C‐2.Alsosupported
areEnterasys Networksvendor‐specificattributes(VSAs),listedinTable C‐2onpage C‐5.
AnattributeissenttoRADIUSaccountingonlyifthetablelistingitshows
YesorOptionalinthe
columnmarkedSentinAccounting‐Requestfortheattributeandtheattributeisappliedtothe
client’ssessi o n configuration.Attributevalueshavethefollowingcharacteristicsunlessotherwise
stated:
•Stringscancontainamaximumof253 characters.
•Integersare4bytes.
•IPaddressesare4bytes.
TheRADIUSattributesMSSsupports
arebasedontheseIETFRFCsanddrafts:
• RFC 2865 ,RemoteAuthenticationDial‐inUserService(RADIUS)
• RFC 2866 ,RADIUSAccounting
• RFC 2868 ,RADIUSAttributesforTunnelProtocolSupport
• RFC 2869 ,RADIUSExtensions
• draft‐congdon‐radius‐8021x‐29.txt(IEEE802.1XRADIUSUsageGuidelines)
For information about... Refer to page...
Supported Standard and Extended Attributes C-2
Enterasys Networks VSAs C-5