Specifications

RoamAbout Mobility System Software Configuration Guide B-1
B
Enabling and Logging Into WebView
WebViewisaweb‐basedmanagementapplicationavailableonRoamAboutSwitches.Youcanuse
WebViewforcommonconfigurationandmanagementtasks.
Browser Requirements
WebViewissupportedonthefollowingbrowsers:
• MozillaFirefoxVersion1.0orlater
•MicrosoftInternetExplorerVersion6.0orlater
TLS1.0,SSL2.0,orSSL3.0mustbeenabledinthebrowser.ToenableTLS1.0,SSL2.0,orSSL3.0in
MicrosoftInternetExplorer:
1. SelectTools>InternetOptionsto
displaytheInternetOptionsdialogbox.
2. SelecttheAdvancedtab.
3. ScrolltothebottomofthelistofoptionsandselecttheTLS1.0,SSL2.0,ortheSSL3.0option,
toenableit.
4. ClickOK.
RBT Switch Requirements
•TheRoamAboutSwitch’sHTTPSservermustbeenabled.(Thisoptionisenabledbydefault.)
IfHTTPSisdisabled,youcanenableitusingthefollowingcommand:
set ip https server enable
•TheswitchmusthaveanIPinterfacethatcanbereachedbythePCwherethebrowseris
installed.
For information about... Refer to page...
Browser Requirements B-1
RBT Switch Requirements B-1
Logging Into WebView B-2