Specifications

Configuring and Managing the System Log
RoamAbout Mobility System Software Configuration Guide A-9
Enabling Mark Messages
YoucanconfigureMSStogeneratemarkmessagesatregularintervals.Themarkmessages
indicatethecurrentsystemtimeanddate.EnterasysNetworkscanusethemarkmessagesto
determinetheapproximatetimewhenasystemrestartorothereventcausingasystemoutage
occurred.
Markmessagesaredisabledbydefault.
Whentheyareenabled,MSSgeneratesamessageatthe
noticelevelonceevery300secondsbydefault.
Toenablemarkmessages,usethefollowingcommand:
set log mark enable
success: change accepted.
Saving Trace Messages in a File
TosavetheaccumulatedtracedataforenabledtracestoafileintheRoamA boutSwitch’s
nonvolatilestorage,usethefollowingcommand:
save trace filename
Tosavetracedataintothefiletrace1inthesubdirectorytraces,typethefollowingcommand:
RBT-8100# save trace traces/trace1
Displaying the Log Configuration
Todisplayyourcurrentlogconfiguration,typethefollowingcommand:
RBT-8100# show log config
Logging console: enabled
Logging console severity: INFO
Logging sessions: enabled
Logging sessions severity: INFO
Logging buffer: enabled
Logging buffer severity: ERROR
Logging buffer size:
1048576 bytes
Logging trace: enabled
Logging trace severity: DEBUG
Logging buffer size: 1048576 bytes
Log Marking: disabled
Log marking severity: Notice
Log marking interval: 300 seconds
Logging server: 192.168.253.11
port 514 severity EMERGENCY
Current session: disabled
Current session severity: INFO