Specifications

AP Authorization from a RoamAbout Switch
24-8 AirDefense Integration with the Enterasys Mobility System
Clearing the AirDefense Sensor Software from the AP’s Configuration
TocleartheAirDefensesensorsoftwarefilefromtheAP’sconfiguration,usethefollowing
command:
clear dap dap-num image
Forexample,thefollowingcommandcausestheAirDefensesensorsoftwarefiletobecleared
fromtheconfigurationofDistributedAP1:
RBT-8100# clear dap 1 image
success: change accepted.
ThenexttimetheDistributedAPisbooted,itwillcomeupasanEnterasysMobilityPoint.
AP Authorization from a RoamAbout Switch
TheAirDefenseEnterprisecanbeconfiguredtosynchronizewithRoamAboutSwitchesto
authorizeEnterasysAccessPoints.Youcansynchronizedevices,byimportingalistofauthorized
AccessPointsfromtheEnterasysRoamAboutSwitch.
Adding a Switch
TheRoamAboutSwitchesmustbeaddedinasimilarfashiontostandardswitchesforsuspicious
devicediscovery.
GotoAddSwitchorImportSwitchesunderSensorManagertoaddanEnterasysswitchand
makesuretoselect‘EnterasysMIB’underMIBSupport.OncetheRoamAboutSwitchesare
added,theEnterprisesystem
willrecognizeallEnterasysAccessPointsasauthorizeddevices.
1. ClickontheConfigbuttontoopentheAirDefenseSystemConfigurationprogramarea.
2. ClickontheSensorManagericonbuttontoaccesstheSensorManagerwindow.
3. FromtheSensorManagerwindow,clickontheAddSwitchorImportSwitchesbuttonsto
opentheir
respectiveGUIs.
SelectingtheAddSwitchbuttonopenstheSwitchInformationpaneltab,asshownin
Figure 24‐3.