Specifications

RoamAbout Mobility System Software Configuration Guide 2-1
2
RoamAbout Switch Set Up Methods
ThischapterdescribesthemethodsyoucanusetoconfigureaRoamAboutSwitch,andrefers you
toinformationforeachmethod. Dependingonyourconfigurationneeds,youcanuseoneora
combinationofthesemethods.
Overview
Quick Starts
MSSprovidesaCLIquickstartmethodfornew(unconfigured)switches:
Youcanusethequickstartmethodtoconfigureaswitchtoprovidewirelessservice.Youalsocan
useanyofthefollowingmanagementapplicationstoconfigureanewswitchortocontinue
configurationofapartiallyconfiguredswitch:
•RoamAboutSwitchManager
•CLI
• WebView
For information about... Refer to page...
Overview 2-1
How a RoamAbout Switch Gets its Configuration 2-3
CLI quickstart Command 2-4
Remote Configuration 2-7
Opening the QuickStart Network Plan in RASM 2-8
Note: For easy installation, use one of the quickstart methods described in this chapter instead of
using the CLI instructions in later chapters in the manual.