Specifications

Configuring Rogue Detection Lists
RoamAbout Mobility System Software Configuration Guide 22-7
Todisplaythepermittedvendorlist,usethefollowingcommand:
show rfdetect vendor-list
Thefollowingexampleshowsthepermittedvendorlistonaswitch:
RBT-8100# show rfdetect vendor-list
Total number of entries: 1
OUI Type
----------------- ------
aa:bb:cc:00:00:00 client
11:22:33:00:00:00 ap
Toremoveanentryfromthepermittedvendorlist,usethefollow ingcommand:
clear rfdetect vendor-list {client | ap} {mac-addr | all}
ThefollowingcommandremovesclientOUIaa:bb:cc:00:00:00fromthepermittedvendorlist:
RBT-8100# clear rfdetect vendor-list client aa:bb:cc:00:00:00
success: aa:bb:cc:00:00:00 is no longer in client vendor-list.
Configuring a Permitted SSID List
Thepermitted SSIDlistspecifiestheSSIDsthatareallowedonthenetwork.IfMSSdetectspackets
foranSSIDthatisnotonthelist,theAPthatsentthepacketsisclassifiedasarogue.MSSissues
countermeasuresagainsttherogueiftheyareenabled.
Bydefault,thepermitted
SSIDlistisemptyandallSSIDsareallowed.Ifyouconfigureapermitted
SSIDlist,MSSallowstrafficonlyfortheSSIDsthatareonthelist.ThepermittedSSIDlistapplies
onlytotheRASonwhichthelistisconfigured.RoamAboutswitchesdonotsharepermittedSSID
lists.
ToaddanSSIDtothelist,usethefollowingcommand:
set rfdetect ssid-list ssid-name
Examples
ThefollowingcommandaddsSSIDmycorptothelistofpermittedSSIDs:
RBT-8100# set rfdetect ssid-list mycorp
success: ssid mycorp is now in ssid-list.
TodisplaythepermittedSSIDlist,usethefollowingcommand:
show rfdetect ssid-list
ThefollowingexampleshowsthepermittedSSIDlistonRAS:
RBT-8100# show rfdetect ssid-list
Total number of entries: 3
SSID
-----------------
mycorp
corporate
guest