Specifications

Displaying and Changing Network Session Timers
21-8 Managing Sessions
Thefollowingcommanddeletesnetworksession 9:
RBT-8100# clear sessions network session-id 9
SM Apr 11 19:53:38 DEBUG SM-STATE: localid 9, mac 00:06:25:09:39:5d,
flags 0000012fh, to change state to KILLING
Localid 9, globalid SESSION-9-893249336 moved from ACTIVE to KILLING
(client=00:06:25:09:39:5d)
Displaying and Changing Network Session Timers
MSSperiodicallysendskeepaliveprobestowirelessclientstoverifythattheclientsarestill
present.Thekeepaliveprobesarenulldataframessentasunicaststoeachclient.MSSexpects
eachclienttorespondwithanAck.MSSsendsthekeepalivesevery10seconds.Youcandisable
thekeepalivesbut
thekeepaliveintervalisnotconfigurable.
MSSalsomaintainsanidletimerforeachuser(wirelessclient).Eachtimetheclientsendsdataor
respondstoakeepaliveprobe,MSSresetstheidletimerto0fortheclient.However,iftheclient
remainsidleforthe periodoftheidle
timer,MSSchangestheclient’ssessiontotheDisassociated
state.Thedefaultidletimeoutvalueis180seconds(3minutes).Youcanchangethetimeouttoa
valuefrom20to86400seconds.Todisablethetimeout,specify0.
Keepaliveprobesandtheuseridletimeoutareconfigurable onaservice
‐profilebasis.
Disabling Keepalive Probes
Todisableorreenablekeepaliveprobesinaserviceprofile,usethefollowingcommand:
set service-profile name idle-client-probing {enable | disable}
Changing or Disabling the User Idle Timeout
Tochangetheuseridleti meout foraserviceprofile,usethefollowingcommand:
set service-profile name user-idle-timeout seconds
Examples
Tochangetheuseridletimeoutforserviceprofilesp1to6minutes(360 seconds),usethefollowing
command:
RBT-8100# set service-profile sp1 user-idle-timeout 360
success: change accepted.
Todisabletheuseridletimeout,usethefollowingcommand:
RBT-8100# set service-profile sp1 user-idle-timeout 0
success: change accepted.
Note: MSS temporarily keeps session information for disassociated web-portal clients to allow them
time to reassociate after roaming. (See “Configuring the Web Portal WebAAA Session Timeout
Period” on page 17-35.)