Specifications

Configuring SODA Functionality
RoamAbout Mobility System Software Configuration Guide 20-7
Enabling SODA Functionality for the Service Profile
ToenableSODAfunctionalityforaserviceprofile,usethefollowingcommand:
set service-profile name soda mode {enable | disable}
WhenSODAfunctionalityisenabledforaserviceprofile,aSODAagentisdownloadedtoclients
attemptingtoconnect toanAPmanagedbythe serviceprofile.TheSODAagentperformsaseries
ofsecurityrelatedchecksontheclient.Bydefault,enforcementofSODAagentchecksisenabled,
sothat
aconnectingclientmustpasstheSODAagentchecksinordertogainaccesstothe
network.
Example
ThefollowingcommandenablesSODAfunctionalityforserviceprofilesp1:
RBT-8100# set service-profile sp1 soda mode enable
success: change accepted.
Disabling Enforcement of SODA Agent Checks
WhenSODAfunctionalityisenabledforaserviceprofile,bydefaulttheSODAagentchecksare
downloadedtoaclientandrunbeforetheclientisallowedonthenetwork.Youcanoptionally
disabletheenforcementoftheSODAsecurity checks,sothat theclientisallowedaccesstothe
network
immediatelyaftertheSODAagentisdownloaded,ratherthanwaitingforthesecurity
checkstoberun.
Todisable(orreenable)theenforcementoftheSODAsecuritychecks,usethefollowing
command:
set service-profile name enforce-checks {enable | disable}
Example
ThefollowingcommanddisablestheenforcementoftheSODAsecuritychecks,allowingnetwork
accesstoclientsaftertheyhavedownloadedtheSODAagent,butwithoutrequiringthatthe
SODAagentchecksbecompleted:
RBT-8100# set service-profile sp1 enforce-checks disable
success: change accepted.
Note: If you disable the enforcement of the SODA security checks, you cannot apply the success
and failure URLs to client devices. In addition, you should not configure the SODA agent to refer to
the success and failure pages on the RoamAbout Switch if you have disabled enforcement of SODA
agent checks.