Specifications

Displaying 802.1X Information
19-8 Managing 802.1X on the RoamAbout Switch
Setting the 802.1X Timeout for an Authorization Server
UsethiscommandtoconfigurethenumberofsecondsbeforetheRAStimesoutarequesttoa
RADIUSauthorizationserver.
set dot1x timeout auth-server seconds
Thedefaultis30 seconds.Therangeisfrom1to65,535 seconds.
Examples
Typethefollowingcommandtosettheau thorizationservertimeoutto60 seconds:
RBT-8100# set dot1x timeout auth-server 60
success: dot1x auth-server timeout set to 60.
Toresettheauthorizationservertimeouttothedefault,typethefollowingcommand:
RBT-8100# clear dot1x timeout auth-server
success: change accepted.
Setting the 802.1X Timeout for a Client
UsethefollowingcommandtosetthenumberofsecondsbeforetheRAStimesoutan
authenticationsessionwithasupplicant(client):
set dot1x timeout supplicant seconds
Thedefaultis30 seconds.Therangeoftimeisfrom1to65,535 seconds.
Examples
Typethefollowingcommandtosetthenumberofsecondsforatimeoutto300:
RBT-8100# set dot1x timeout supplicant 300
success: dot1x supplicant timeout set to 300.
Typethefollowingcommandtoresetthetimeoutperiod:
RBT-8100# clear dot1x timeout supplicant
success: change accepted.
Displaying 802.1X Information
Thiscommanddisplays802.1Xinformationforclients,statistics,VLANs,andconfiguration.
show dot1x {clients | stats | config}
• showdot1xclientsdisplaystheusername,MACaddress,VLAN,andstateofactive802.1X 
clients.
• showdot1xconfigdisplaysasummaryofthecurrentconfiguration.
• showdot1xstatsdisplaysglobal802.1Xstatisticalinformationassociatedwith connectingand
authenticating.