Specifications

Managing Other Timers
RoamAbout Mobility System Software Configuration Guide 19-7
Typethefollowingcommandtoresetthedefaulttimeoutperiod:
RBT-8100# clear dot1x reauth-period
success: change accepted.
Setting the Bonded Authentication Period
ThefollowingcommandsetstheBondedAuth™(bondedauthentication)period,whichisthe
numberofsecondsMSSretainssessioninformationforanauthentica tedmachinewhilewaiting
forthe802.1Xclientonthemachinetostart(re)authenticationfortheuser.
Normally,theBondedAuthperiodneedstobesetonlyifthe
networkhasBondedAuthclients
thatusedynamicWEP,oruseWEP‐40orWEP‐104encryptionwithWPAorRSN.Theseclients
canbeaffectedbythe 802.1XreauthenticationparameterortheRADIUSSession‐Timeout
parameter.
TosettheBondedAuthperiod,usethefollowingcommand:
set dot1x bonded-period seconds
TheBondedAuthperiodappliesonlyto802.1Xauthentication rulestha tcontainthebonded
option.
ToresettheBondedAuthperiodtoitsdefaultvalue,usethefollowingcommand:
clear dot1x max-req
(FormoreinformationaboutBondedAuth,see“BindingUserAuthenticationtoMachine
Authentication”onpage 17‐15.)
Managing Other Timers
Bydefault,theRASwaits60 secondsbeforerespondingtoaclientwhoseauthenticati onfailed,
andtimesoutarequesttoaRADIUSserveroranauthenticationsessionwithaclientafter
30 seconds.Youcanmodify thesedefaults.
Setting the 802.1X Quiet Period
ThefollowingcommandconfiguresthenumberofsecondsaRASremainsquietanddoesnot
respondtoasupplicant(client)afterafailedauthentication:
set dot1x quiet-period seconds
Thedefaultis60 seconds.Theacceptablerangeisfrom0to65,535 seconds.
Examples
Typethefollowingcommandtosetthequ ietperiodto300 seconds:
RBT-8100# set dot1x quiet-period 300
success: dot1x quiet period set to 300.
Typethefollowingcommandtoresetthe802.1Xquietperiod tothedefault:
RBT-8100# clear dot1x quiet-period
success: change accepted.