Specifications

Configuring Accounting for Wireless Network Users
RoamAbout Mobility System Software Configuration Guide 17-55
Id Clauses
----------------------------------------------------------------
1) permit vlan guest_1 if vlan neq *.ourfirm.com
2) permit vlan bld4.tac inacl tac_24.in if user eq *.ny.ourfirm.com
3) permit inacl svcs_2.in outacl svcs_3.out if vlan eq bldg4.*
4) deny if user eq *.theirfirm.com
Clearing Location Policy Rules and Disabling the Location Policy
Todeletealocationpolicyrule,usethefollowing comm and:
clear location policy rule-number
Typeshowlocationpolicytodisplaythenumbersofconfiguredlocationpolicyrules.Todisable
thelocationpolicyonaRoamAboutSwitch,deleteallthelocationpolicyrules.
Configuring Accounting for Wireless Network Users
Accountingrecordscomeinthreetypes:start,stop,andupdate.MSSgeneratestheserecords
basedontheconfiguredaccountingmode,eitherstart‐stoporstop‐only:
•Whenstart‐stopmodeisconfigured,astartrecordisgeneratedwhenauserisfirstconnected,
anupdaterecord isgeneratedwhenauser
roamsfromoneaccesspointtoanother,andastop
recordisgeneratedwhenauserterminateshisorhersession.
•Whenstop‐onlymodeisconfigured,astoprecordisgeneratedwhenauserterminateshisor
hersession.
Optionally,MSScanbeconfiguredtosendupdaterecordsatperiodic
intervals,andalsogenerate
anAccounting‐OnmessagewhentheRoamAboutSwitchstarts,andanAccounting‐Offmessage
whentheRoamAboutSwitchisadminstrativelyshutdown.Thisfunctionalitycanbeusedin
conjunctionwithbillingsystemsthatrequireperiodicaccountingmessages.
Tosetaccounting,typethefollowingcommand:
set accounting {admin | console | dot1x | mac | web} {ssid ssid-name | wired}
{user-glob | mac-addr-glob} {start-stop | stop-only} method1 [method2] [method3]
[method4]
Foreaxmple,tostorestart‐stopaccountingrecordsatexample.comfor802.1XusersofSSID
mycorpinthelocaldatabase,typethefollowingcommand:
RBT-8100# set accounting dot1x ssid mycorp *@example.com start-stop local
success: change accepted.
Theaccountingrecordscancontainthefollowingsessioninformation:
Start Records Update and Stop Records
Session date and time Session date and time
Location of authentication (if any): RADIUS server
(1) or local database (2)
Location of authentication (if any): RADIUS server
(1) or local database (2)
ID for related sessions ID for related sessions
Username Username