Specifications

Enabling Prioritization for Legacy Voice over IP
15-26 Configuring and Managing Security ACLs
Configuring a Service Profile for WPA
ToconfigureaserviceprofileforSVPphonesthatuseWPA:
• CreatetheserviceprofileandaddthevoiceSSIDtoit.
•EnabletheWPAinformationelement(IE).ThisalsoenablesTKIP.LeaveTKIPenabled.
•Disable802.1Xauthenticationandenablepresharedkey(PSK)authenticationinstead.
•EnterthePSKkey.
Example
Thefollowingcommandsconfigureaserviceprofilecalledvowlan‐wpa2forRSN:
RBT-8100# set service-profile vowlan-wpa ssid-name phones
RBT-8100# set service-profile vowlan-wpa wpa-ie enable
RBT-8100# set service-profile vowlan-wpa auth-dot1x disable
RBT-8100# set service-profile vowlan-wpa auth-psk enable
RBT-8100# set service-profile vowlan-wpa psk-raw
c25d3fe4483e867d1df96eaacdf8b02451fa0836162e758100f5f6b87965e59d
Configuring a Radio Profile
MSShasadefaultradioprofile,whichmanagesallradiosbydefault.Someoftheradio
parametersrequirechangesforvoicetraffic.Youcanmodifythedefaultradioprofileorcreatea
newone.
Tocreateormodifyaradioprofileforvoiceclients:
–Maptheserv iceprofileyoucreatedfor
thevoiceSSIDtotheradioprofile.
– Changethedeliverytrafficindication map(DTIM)intervalto3.
– ConfigureAPs,ifnotalreadyconfigured.
–Mapradiostotheradioprofileandenablethem.
Example
ThefollowingcommandsmodifythedefaultradioprofileforSVPphones:
RBT-8100# set radio-profile default service-profile vowlan-wpa2
RBT-8100# set radio-profile default dtim-interval 3
RBT-8100# set radio-profile default qos-mode svp
TheAPradiosarealreadyinthedefaultradioprofilebydefault,sotheydonotneedtobe
explicitlyaddedtotheprofile.However,ifyoucreateanewradioprofileforvoiceclients,youwill
needtodisabletheradios,mapthemtothenewradioprofile,thenreenable
them.
Note: Some radio settings that are beneficial for voice traffic might not be beneficial for other
wireless clients. If you plan to support other wireless clients in addition to voice clients, Enterasys
Networks recommends that you create a new radio profile specifically for voice clients, or use the
default radio profile only for voice clients and create a new profile for other clients. The examples in
this section modify the default radio profile for voice clients.