Specifications

Displaying QoS Information
12-18 Configuring Quality of Service
Displaying QoS Information
YoucandisplaythefollowingtypesofinformationforQoS:
•RadioprofileQoSsettings:QoSmode
,U‐APSDsupport
•ServiceprofileQoSsettings:CAC,staticCoS,andbroadcastcontrolsettings
•Broadcastcontrolsettings
•DefaultCoSmappings
•IndividualDSCP‐to‐CoSorCoS‐to‐DSCPmappings
•TheDSCPtable(areferenceofstandardmappingsfromDSCPtoIPToSandIPprecedence)
•QoSStatisticsfortheAPforwardingqueues
Displaying a Radio Profile’s QoS Settings
TodisplaytheQoSmodeandallothersettingsforaradioprofile,usethefollowingcommand:
show radio-profile {name | ?}
Example
Thefollowingexampleshowstheconfigurationofradioprofilerp1.
RBT-8100# show radio-profile rp1
Beacon Interval: 100 DTIM Interval: 1
Max Tx Lifetime: 2000 Max Rx Lifetime: 2000
RTS Threshold: 2346 Frag Threshold: 2346
Long Preamble: no Tune Channel: yes
Tune Power: no Tune Channel Interval: 3600
Tune Power Interval: 600 Power ramp interval: 60
Channel Holddown: 300 Countermeasures: none
Active-Scan: yes RFID enabled: no
WMM Powersave: no QoS Mode: wmm
Service profiles: sp1
Inthisexample,theQoSmodeisWMMandU‐APSDsupport(WMMpowersave)isdisabled.