Specifications

Changing QoS Settings
RoamAbout Mobility System Software Configuration Guide 12-17
Changing CoS Mappings
TochangeCoSmappings,usethefollowingcommands:
set qos dscp-to-cos-map dscp-range cos level
set qos cos-to-dscp-map level dscp dscp-value
ThefirstcommandchangesthemappingofingressDSCPvaluestotheinternalQoStablewhen
markingpackets.ThesecondcommandchangesthemappingsoftheinternalQoSvaluestoDSCP
valuewhentaggingoutboundpackets.
Examples
ThefollowingcommandchangesthemappingofDSCPvalue45fromCoSvalue5toCoSvalue7.
(Thechangeaffectsclassificationbutdoesnotaffectmarking.)
RBT-8100# set qos dscp-to-cos-map 45 cos 7
success: change accepted.
ThefollowingcommandchangesthemappingofCoSvalue6fromDSCPvalue48toDSCPvalue
55.(Thechangeaffectsmarkingbutdoesnotaffectclassification.)
RBT-8100# set qos cos-to-dscp-map 6 dscp 55
success: change accepted.
Enabling Broadcast Control
Toenablebroadcastcontrolfeaturesonaservice‐profilebasis,usingthefollowingcommands:
set service-profile name proxy-arp {enable | disable}
set service-profile name dhcp-restrict {enable | disable}
set service-profile name no-broadcast {enable | disable}
Examples
Forexample,toenableallthesebroadcastcontrolfeaturesinserviceprofilesp1,usethefollowing
commands:
RBT-8100# set service-profile sp1 proxy-arp enable
success: change accepted.
RBT-8100# set service-profile sp1 dhcp-restrict enable
success: change accepted.
RBT-8100# set service-profile sp1 no-broadcast enable
success: change accepted.