Specifications

Displaying RF Auto-Tuning Information
11-10 Configuring RF Auto-Tuning
Displaying RF Neighbors
TodisplaytheotherradiosthataspecificEnterasysradiocanhear,usethefollow ingcommands:
show auto-tune neighbors [dap dap-num [radio {1 | 2| all}]]
Thelistofradiosincludesbeaconedthird‐partySSIDs,andbothbeaconedandunbeaconed
EnterasysSSIDs.
Example
Todisplayneighborinformationforradio1ontheAP,typethefollowingcommand:
RBT-8100# show auto-tune neighbors ap 2 radio 1
Total number of entries for radio 1: 5
Channel Neighbor BSS/MAC RSSI
------- ----------------- ----
1 00:0b:85:06:e3:60 -46
1 00:0b:0e:00:0a:80 -78
1 00:0b:0e:00:d2:c0 -74
1 00:0b:85:06:dd:00 -50
1 00:0b:0e:00:05:c1 -72
Displaying RF Attributes
TodisplaythecurrentvaluesoftheRFattributesRF Auto‐Tuningusestodecidewhetherto
changechannelorpowersettings,usethefollowingcommands:
show auto-tune attributes [dap dap-num [radio {1 | 2| all}]]
Example
TodisplayRFattributeinformationforradio 1ontheAP,typethefollowingcommand:
RBT-8100# show auto-tune attributes ap 2 radio 1
Auto-tune attributes for radio 1:
Noise: -92 Packet Retransmission Count: 0
Utilization: 0 Phy Errors Count: 0
CRC Errors count: 122