Specifications

Changing RF Auto-Tuning Settings
RoamAbout Mobility System Software Configuration Guide 11-7
Changing the Channel Holddown Interval
Thedefaultchannelholddownintervalis900seconds.Youcanchangetheintervaltoavaluefrom
0to65535seconds.Tochangethechannelholddowninterval,usethefollowingcommand:
set radio-profile name auto-tune channel-holddown holddown
Example
Tochangethechannelholddownforradiosinradioprofilerp2to600seconds,typethefollowing
command:
RBT-8100# set radio-profile rp2 auto-tune channel-holddown 600
success: change accepted.
Changing Power Tuning Settings
Enabling Power Tuning
RF Auto‐Tuning forpowerisdisabledbydefault.Toenableordisablethefeatureforallradiosin
aradioprofile,usethefollowingcommand:
set radio-profile name auto-tune power-config {enable | disable}
Example
Toenablepowertuningforradiosintherp2radioprofile,typethefollowingcommand:
RBT-8100# set radio-profile rp2 auto-tune power-config enable
success: change accepted.
Changing the Power Tuning Interval
Thedefaultpowertuningintervalis300seconds.Youcanchangetheintervaltoavaluefrom1to
65535seconds.Tochangethepowertuninginterval,usethefollowingcommand:
set radio-profile name auto-tune power-interval seconds
Example
Tosetthepowertuningintervalfor radiosinradioprofilerp2to240seconds,typethefollowing
command:
RBT-8100# set radio-profile rp2 auto-tune power-interval 240
success: change accepted.