Specifications

Encryption Configuration Scenarios
RoamAbout Mobility System Software Configuration Guide 10-23
10. Configureapassphraseforthepresharedkey.Typethefollowingcommand:
RBT-8100# set service-profile wpa-wep-for-mac psk-phrase "passphrase to
convert into a preshared key"
11. DisplaytheWPAconfigurationchanges.Typethefollowingcommand:
RBT-8100# show service-profile sp1
ssid-name: voice ssid-type:
crypto
Beacon: yes Proxy ARP: no
DHCP restrict: no No broadcast: no
Short retry limit: 5 Long retry limit: 5
Auth fallthru: none Sygate On-Demand (SODA): no
Enforce SODA checks: yes SODA remediation ACL:
Custom success web-page: Custom failure web-page:
Custom logout web-page: Custom agent-directory:
Static COS: no COS: 0
CAC mode: none CAC sessions: 14
User idle timeout: 180 Idle client probing: yes
Keep initial vlan: no Web Portal Session Timeout: 5
Web Portal ACL:
WEP Key 1 value: <none> WEP Key 2 value: <none>
WEP Key 3 value: <none> WEP Key 4 value: <none>
WEP Unicast Index: 1 WEP Multicast Index: 1
Shared Key Auth: NO
WPA enabled:
ciphers: cipher-tkip, cipher-wep40
authentication: pre-shared key
TKIP countermeasures time: 60000ms
pre-shared-key: 92f99cd49e186cadee13fda7b2a2bac78975
a5723a4a6b31b5b5395d6b001dbe
12. Mapserviceprofilewpa‐wep‐for‐mactoradioprofilerp3.Typethefollowingcommands:
RBT-8100# set radio-profile rp3 service-profile wpa-wep-for-mac
success: change accepted.
13. Applyradioprofilerp3toradio1onport4andtoradios1and 2onport6andenablethe
radios,andverifytheconfigurationchanges.Typethefollowingcommands:
RBT-8100# set ap 4,6 radio 1 radio-profile rp3 mode enable
success: change accepted.
RBT-8100# set ap 6 radio 2 radio-profile rp3 mode enable
success: change accepted.
RBT-8100# show ap config
Port 4: AP model: MP-241, POE: enable, bias: high, name: MP04
boot-download-enable: YES
force-image-download: YES
Radio 1: type: 802.11a, mode: enabled, channel: 36
tx pwr: 1, profile: rp3
auto-tune max-power: default
Port 6: AP model: mp-252, POE: enable, bias: high, name: MP06
boot-download-enable: YES
force-image-download: YES