Specifications

Encryption Configuration Scenarios
RoamAbout Mobility System Software Configuration Guide 10-21
8. Applyradioprofilerp2toradio1onport5andtoradios1and2onport 11,enabletheradios,
andverifytheconfigurationchanges.Typethefollowingcommands:
RBT-8100# set ap 5,11 radio 1 radio-profile rp2 mode enable
success: change accepted.
RBT-8100# set ap 11 radio 2 radio-profile rp2 mode enable
success: change accepted.
RBT-8100# show ap config
Port 5: AP model: mp-241, POE: enable, bias: high, name: MP05
boot-download-enable: YES
force-image-download: YES
Radio 1: type: 802.11a, mode: enabled, channel: 36
tx pwr: 1, profile: rp2
auto-tune max-power: default
Port 11: AP model: mp-252, POE: enable, bias: high, name: MP11
boot-download-enable: YES
force-image-download: YES
Radio 1: type: 802.11g, mode: enabled, channel: 6
tx pwr: 1, profile: rp2
auto-tune max-power: default
Radio 2: type: 802.11a, mode: enabled, channel: 36
tx pwr: 1, profile: rp2
auto-tune max-power: default
9. Savetheconfiguration.Typethe f ollowingcommand:
RBT-8100# save config
success: configuration saved.