Specifications

Configuring WEP
RoamAbout Mobility System Software Configuration Guide 10-17
Example
ToconfigureWEPkeyindex1forradioprofilerp1 toaabbccddee,typethefollowingcommand:
RBT-8100# set service-profile rp1 wep key-index 1 key aabbccddee
success: change accepted.
Assigning Static WEP Keys
WhenstaticWEPisenabled,staticWEPkey 1isassignedtounicastandmulticasttrafficby
default.Toassignanotherkeytounicastormulticasttraffic,usethefollowingcommands:
set service-profile name wep active-multicast-index num
set service-profile name wep active-unicast-index num
Thenumparameterspecifiesthekeyandthevaluecanbefrom1to4.
Examples
ToconfigureanSSIDthatusesserviceprofilewepsrvctouseWEPkeyindex2forencrypting
multicasttraffic,typethefollowingcommand:
RBT-8100# set service-profile wepsrvc wep active-multicast-index 2
success: change accepted.
ToconfigureanSSIDthatusesserviceprofilewepsrvc4touseWEPkeyindex4forencrypting
unicasttraffic,typethefollowingcommand:
RBT-8100# set service-profile wepsrvc4 wep active-unicast-index 4
success: change accepted.