Specifications

Configuring RSN (802.11i)
10-14 Configuring User Encryption
Assigning the Service Profile to Radios and Enabling the Radios
AfteryouconfigureRSNsettingsinaserviceprofile,youcanmaptheserviceprofiletoaradio
profile,assigntheradioprofiletoradios,andenabletheradiostoactivatethesettings.
Tomapaserviceprofiletoaradioprofile,usethefollowingcommand:
set radio-profile name service-profile name
Toassignaradioprofiletoradiosandenabletheradios,usethefollowingcommand:
set ap port-list radio {1 | 2} radio-profile name mode {enable | disable}
Example
Tomapserviceprofilersntoradioprofilebldg2,typethefollowingcommand:
RBT-8100# set radio-profile blgd2 service-profile rsn
success: change accepted.