Specifications

Configuring WPA
RoamAbout Mobility System Software Configuration Guide 10-11
11a beacon rate: 6.0 multicast rate: AUTO
11a mandatory rate: 6.0,12.0,24.0 standard rates: 9.0,18.0,36.0,48.0,54.0
11b beacon rate: 2.0 multicast rate: AUTO
11b mandatory rate: 1.0,2.0 standard rates: 5.5,11.0
11g beacon rate: 2.0 multicast rate: AUTO
11g mandatory rate: 1.0,2.0,5.5,11.0 standard rates: 6.0,9.0,12.0,18.0,24.0,
36.0.48.0,54.0
TheWPAsettingsappearatthebottomoftheoutput.
Assigning the Service Profile to Radios and Enabling the Radios
AfteryouconfigureWPAsettingsinaserviceprofile,youcanmaptheserviceprofiletoaradio
profile,assigntheradioprofiletoradios,andenabletheradiostoactivatethesettings.
Tomapaserviceprofiletoaradioprofile,usethefollowingcommand:
set radio-profile name service-profile name
Toassignaradioprofiletoradiosandenabletheradios,usethefollowingcommand:
set ap port-list radio {1 | 2} radio-profile name mode {enable | disable}
Examples
Tomapserviceprofilewpatoradioprofilebldg1,typethefollow ingcommand:
RBT-8100# set radio-profile blgd1 service-profile wpa
success: change accepted.
Toassignradioprofilebldg1toradio1onports5‐8,11‐14,and16andenabletheradios,typethe
followingcommand:
RBT-8100# set ap 5-8,11-14,16 radio 1 radio-profile bldg1 mode enable
success: change accepted.
Toassignradioprofilebldg1toradio2onports11‐14andport16andenabletheradios,typethe
followingcommand:
RBT-8100# set ap 11-14,16 radio 2 radio-profile bldg1 mode enable
success: change accepted.
Note: The WPA fields appear in the show service-profile output only when WPA is enabled.