Specifications

Configuring WPA
10-10 Configuring User Encryption
RBT-8100# set service-profile wpa psk-raw
c25d3fe4483e867d1df96eaacdf8b02451fa0836162e758100f5f6b87965e59d
success: change accepted.
Disabling 802.1X Authentication for WPA
Todisable802.1XauthenticationforWPAclients,usethefollowingcommand:
set service-profile name auth-dot1x {enable | disable}
Example
TodisableWPAauthenticationinserviceprofile wpa,typethefollowingcommand:
RBT-8100# set service-profile wpa auth-dot1x disable
success: change accepted.
Displaying WPA Settings
TodisplaytheWPAsettingsinaserviceprofile,usethefollowingcommand:
show service-profile {name | ?}
Example
TodisplaytheWPAsettingsineffectinserviceprofilewpa,typethefollowingcommand:
RBT-8100# show service-profile sp1
ssid-name: private ssid-type: crypto
Beacon: yes Proxy ARP: no
DHCP restrict: no No broadcast: no
Short retry limit: 5 Long retry limit: 5
Auth fallthru: none Sygate On-Demand (SODA): no
Enforce SODA checks: yes SODA remediation ACL:
Custom success web-page: Custom failure web-page:
Custom logout web-page: Custom agent-directory:
Static COS: no COS: 0
CAC mode: none CAC sessions: 14
User idle timeout: 180 Idle client probing: yes
Keep initial vlan: no Web Portal Session Timeout: 5
Web Portal ACL:
WEP Key 1 value: <none> WEP Key 2 value: <none>
WEP Key 3 value: <none> WEP Key 4 value: <none>
WEP Unicast Index: 1 WEP Multicast Index: 1
Shared Key Auth: NO
WPA enabled:
ciphers: cipher-tkip, cipher-wep40
authentication: 802.1X
TKIP countermeasures time: 30000ms
Note: This command does not disable 802.1X authentication for non-WPA clients.