Specifications

Displaying AP Information
RoamAbout Mobility System Software Configuration Guide 9-59
Displaying AP Status Information
TodisplaystatusinformationincludinglinkstateandRoamAboutSwitchstatus,usethe
followingcommands:
show ap status [terse] | [port-list | all [radio {1 | 2}]]
show dap status [terse] | [dap-num | all [radio {1 | 2}]]
TheterseoptiondisplaysabrieflineofessentialstatusinformationforeachDistributedAP.
ThealloptiondisplaysinformationforallDistributedAPsconfiguredontheswitch.
Example
ThefollowingcommanddisplaysthestatusofaDistributedaccesspoint:
RBT-8100# show dap status 1
Dap: 1, IP-addr: 10.2.30.5 (vlan 'vlan-corp'), AP model: AP3000,
manufacturer: Enterasys, name: DAP01
fingerprint: b4:f9:2a:52:37:58:f4:d0:10:75:43:2f:45:c9:52:c3
====================================================
State: operational (not encrypted)
CPU info: IBM:PPC speed=266666664 Hz version=405GPr
id=0x29c15335347f1919 ram=33554432
s/n=0333703027 hw_rev=A3
Uptime: 18 hours, 36 minutes, 27 seconds
Radio 1 type: 802.11g, state: configure succeed [Enabled] (802.11b protect)
operational channel: 1 operational power: 14
base mac: 00:0b:0e:00:d2:c0
bssid1: 00:0b:0e:00:d2:c0, ssid: public
bssid2: 00:0b:0e:00:d2:c2, ssid: employee-net
bssid3: 00:0b:0e:00:d2:c4, ssid: mycorp-tkip
Radio 2 type: 802.11a, state: configure succeed [Enabled]
operational channel: 64 operational power: 14
base mac: 00:0b:0e:00:d2:c1
bssid1: 00:0b:0e:00:d2:c1, ssid: public
bssid2: 00:0b:0e:00:d2:c3, ssid: employee-net
bssid3: 00:0b:0e:00:d2:c5, ssid: mycorp-tkip
(Forinformationaboutthefieldsintheoutput,refertotheRoamAboutMobilitySystemSoftware
CommandLineInterfaceReference.)