Specifications

Displaying AP Information
9-58 Configuring Access Points
Displaying Radio Profile Information
Todisplayradioprofileinformation,usethefollowingcommand:
show radio-profile {name | ?}
Enteringshowradio‐profile?displaysalistofradioprofiles.
Example
Todisplayradioprofileinformationforthedefaultradioprofile,typethefollowingcommand:
RBT-8100# show radio-profile default
Beacon Interval: 100 DTIM Interval: 1
Max Tx Lifetime: 2000 Max Rx Lifetime: 2000
RTS Threshold: 2346 Frag Threshold: 2346
Long Preamble: no Tune Channel: yes
Tune Power: no Tune Channel Interval: 3600
Tune Power Interval: 600 Power ramp interval: 60
Channel Holddown: 300 Countermeasures: none
Active-Scan: yes RFID enabled: no
WMM Powersave: no QoS Mode: wmm
No service profiles configured.
(Forinformationaboutthefieldsintheoutput,refertotheRoamAboutMobilitySystemSoftware
CommandLineInterfaceReferenceGuide.)