Specifications

Displaying AP Information
9-56 Configuring Access Points
TheDAPfieldindicatestheconnectionnumberofeachAPontheRoamAboutSwitchonwhich
thecommandistyped.Ahyphen( ‐ )intheDAPfieldindicatesthattheAPisconfiguredon
anotherRoamAboutSwitchinthesameMobilityDomain.
Displaying a List of Distributed APs that Are Not Configured
TodisplayalistonDistributedAPsthatarenotconfigured,usethefollowingcommand:
show dap unconfigured
Example
ThefollowingcommanddisplaysinformationfortwoDistributedAPsthatarenotconfigured:
RBT-8100# show dap unconfigured
Total number of entries: 2
Serial Id Model IP Address Port Vlan
----------- ------ --------------- ---- --------
0333001287 AP3000 10.3.8.54 1 default
0333001285 AP3000 10.3.8.57 2 vlan-eng
Displaying Connection Information for Distributed APs
ADistributedAPcanhaveonlyoneactivedataconnection.TodisplaythesystemIPaddressof
theRoamAboutSwitchthathastheactiveconnection,usethefollowingcommand:
show dap connection [dap-num | serial-id serial-ID]
Theserial‐idparameterdisplaystheactiveconnectionforaDistributedAPevenifthatAPisnot
configuredonthisRoamAboutSwitch.However,ifyouusethecommandwiththedap‐num
parameterorwithoutaparameter,connectioninformationisdisplayedonlyforDistributedAPs
thatareconfiguredonthis
RoamAboutSwitch.