Specifications

Displaying AP Information
RoamAbout Mobility System Software Configuration Guide 9-55
load balancing group: none
location: The conference room
contact: Bob the IT guy
Radio 1: type: 802.11g, mode: disabled, channel: dynamic
tx pwr: 1, profile: default
auto-tune max-power: default
Radio 2: type: 802.11a, mode: disabled, channel: dymanic
tx pwr: 1, profile: default
auto-tune max-power: default
(Forinformationaboutthefieldsintheoutput,refertotheRoamAboutMobilitySystemSoftware
CommandLineInterfaceReferenceGuide.)
Displaying Active Connection Information for Distributed APs
TodisplayconnectioninformationforDistributedAPsconfiguredonaRoamAboutSwitch,use
thefollowingcommand:
showdapglobal[dapnum|serialidserialID]
ThiscommandliststheSystemIPaddressesofalltheRoamAboutSwitchswitchesonwhicheach
DistributedAPisconfigured,andliststhebiasfor
theAPoneachswitch.For eachDistributedAP
thatisconfiguredontheswitchonwhichyouusethecommand,theconnectionnumberisalso
listed.
ConnectionsareshownonlyfortheDistributedAPsthatareconfiguredontheRoamAbout
Switchfromwhichyouenterthecommand,andonlyfor
theMobilityDomaintheswitchisin.
Example
TodisplayconnectioninformationforallDistributedAPsconfiguredonaRoamAboutSwitch,
typethefollowingcommand:
show dap global
Total number of entries: 8
DAP Serial Id RBT IP Address Bias
-------- ----------- --------------- ----
1 11223344 10.3.8.111 HIGH
- 11223344 10.4.3.2 LOW
2 332211 10.3.8.111 LOW
- 332211 10.4.3.2 HIGH
17 0322100185 10.3.8.111 HIGH
- 0322100185 10.4.3.2 LOW
18 0321500120 10.3.8.111 LOW
- 0321500120 10.4.3.2 HIGH
Thiscommand indicatesthatfourDistributedAPsareconfiguredontheRoamAboutSwitch,with
serialIDs 1122334 4,332211,0322100185,and0321500120.EachAPisalsoconfiguredononeoftwo
otherRoamAboutSwitches,withsystemIPaddresses10.3.8.111and10.4.3.2.ThebiasfortheAP
oneachRoamAboutSwitch
islisted.Normally,aDistributedAPbootsfromtheRoamAbout
SwitchwiththehighbiasfortheAP.(Formoreinformation,referto“BootProcess forAPs”on
page 96.)