Specifications

Displaying AP Information
9-54 Configuring Access Points
Displaying AP Information
YoucandisplaythefollowingAPinformation:
•APandradio‐specificconfigurationsettings
• ConnectioninformationforDistributedAPsconfiguredonaRoamAboutSwitch
•ListofDistributedAPsthatarenotconfiguredonaRoamAboutSwitch
• ConnectioninformationforDistributedAPs
•Serviceprofileinformation
•Radioprofileinformation
•Statusinformation
• InformationaboutstaticIPaddresseson
DistributedAPs
•Statisticscounters
Displaying AP Configuration Information
Todisplayconfigurationinformation,usethefollowingcommands:
show ap config [port-list [radio {1 | 2}]]
show dap config [dap-num [radio {1 | 2}]]
Thecommandlistsinformationseparatelyforeachaccesspoint.
Examples
TodisplayconfigurationinformationforanaccesspointonRoamAboutSwitchport2,typethe
followingcommand:
RBT-8100# show ap config 2
Port 2: AP model: RBT-1602, POE: enable, bias: high, name: AP02
boot-download-enable: YES
force-image-download: NO
load balancing group: none
location: The conference room
contact: Bob the IT guy
Radio 1: type: 802.11g, mode: disabled, channel: dynamic
tx pwr: 1, profile: default
auto-tune max-power: default
Radio 2: type: 802.11a, mode: disabled, channel: dynamic
tx pwr: 1, profile: default
auto-tune max-power: default
TodisplayconfigurationinformationforaDistributedAPconfiguredonconnection1,typethe
followingcommand:
RBT-8100# show dap config 1
Dap 1: serial-id: 12345678, AP model: RBT-1602, bias: high, name: DAP01
fingerprint: b4:f9:2a:52:37:58:f4:d0:10:75:43:2f:45:c9:52:c3
boot-download-enable: YES
force-image-download: NO