Specifications

Configuring Access Points
9-50 Configuring Access Points
Configuring the External Antenna Model and Location
MenuchoicesfortheRBT‐1602arelistedinTable 9‐10.MenuchoicesfortheTRPZ‐MP‐620are
listedinTable 9‐11.Usetheantennapartnumberstoidentifythecorrectmenuchoice.
Specifying the External Antenna Model
Tospecifytheexternalantennamodel,usethefollowingcommand:
set {ap port-list | dap dap-num} radio {1 | 2} antennatype
{ANT1060 | ANT1120 | ANT1180 | ANT5060 | ANT5120 | ANT5180 | ANT}1360-OUT |
ANT-5360-OUT | ANT-5120-OUT}
ToconfigureantennamodelANT‐1060foranRBT‐1602onDistributedAP1,typethefollowing
command:
RBT-8100# set dap 1 radio 1 antennatype ANT1060
success: change accepted.
Specifying the External Antenna Location
Insomecases,thesetofvalidchannelsforaradiodiffersdependingonwhethertheantennais
locatedindoorsoroutdoors.Youcanensurethatthepropersetofchannelsisavailableonthe
radiobyspecifyingtheantenna’slocation(indoorsoroutdoors).Thedefa ultlocationisindoors.
Tochangeanexternalantenna’slocation,usethefollowingcommand:
set {ap port-list | dap dap-num} antenna-location {indoors | outdoors}
Table 9-10 RBT-1602 External Antenna Models
Part Number
1
1. These are the numbers that appear on the antennas. The numbers beginning ANT (under RASM Antenna Selection) are the
corresponding part numbers used in RASM, and are the numbers you specify when configuring the AP.
RASM Antenna
Selection
Beamwidth
Radio Type Hoizontal Vertical
RBTES-BG-S1060 ANT1060 802.11b/g 60° 65°
RBTES-BG-S07120 ANT1120 802.11b/g 120° 60°
RBTES-BG-S06180 ANT1180 802.11b/g 180° 40°
RBTES-AW-S1460 ANT5060 802.11a 60° 14°
RBTES-AW-S12120 ANT5120 802.11a 120° 14°
RBTES-AW-S10180 ANT5180 802.11a 180° 14°
Table 9-11 TRPZ-MP-620 External Antenna Models
RASM Antenna
Selection
Beamwidth
Part Number
1
1. These are the numbers that appear on the antennas. The numbers beginning ANT (under RASM Antenna Selection) are the
corresponding part numbers used in RASM, and are the numbers you specify when configuring the AP.
Radio Type
Gain (dBi) Horizontal Vertical
WA6202-ANT-8G ANT-1360-OUT 802.11b/g 8 360° 15°
WA5201M-ANT-8A-1 ANT-5360-OUT 802.11a 8 360° 12°
WA5201M-ANT-14A ANT-5120-OUT 802.11a 14 120° 6°