Specifications

Configuring Access Points
RoamAbout Mobility System Software Configuration Guide 9-39
Configuring a Service Profile
Aserviceprofileisasetofparametersthatcontroladvertisement(beaconing)andencryptionfor
anSSID.
ThissectiondescribeshowtocreateaserviceprofileandsetsomebasicSSIDparameters.To
configureotherserviceprofileparameters,refertothefollowing:
• Chapter 10,”ConfiguringUserEncryption”
• Chapter 12,”ConfiguringQuality
ofService”
•“ConfiguringWebWebPortalWebAAA”onpage 17‐22
•“AssigningSSIDDefaultAttributestoaServiceProfil e”onpage 17‐47
• Chapter 20,”ConfiguringSODAEndpointSecurityforaRoamAboutSwitch”
(Foralistoftheparameterscontrolledbyserviceprofilesandtheirdefaults,refertoTable 9‐2on
page 9
‐14.)
(Todisplayserviceprofilesettings,referto“DisplayingServiceProf ileInformation”onpage 9‐57.)
Creating a Service Profile
TocreateaserviceprofileandassignanSSIDtoit,usethefollowingcommand:
set service-profile name ssid-name ssid-name
AnSSIDcanbeupto32alphanumericcharacterslong.
Youcanincludeblankspacesinthename,ifyoudelimitthenamewithsingleordoublequotation
marks.Youmustusethesametypeofquotationmark(eithersingleordouble)onbothendsofthe
string.
Example
ThefollowingcommandappliesthenamecorporateuserstotheSSIDmanagedbyserviceprofile
mycorp_srvcprf:
RBT-8100# set service-profile mycorp_srvcprf ssid-name “corporate users”
success: change accepted.
Removing a Service Profile
Toremoveaserviceprofile,usethefollowingcommand:
clear service-profile name
[soda {agent-directory | failure-page | remediation-acl | success-page | logout-
page}]
ThesodaoptionsresetSygateOn‐Demand(SODA)settingstotheirdefaultvalues.Ifyouomitthe
sodaoption,theserviceprofilespecifiedbynameiscompletelyremoved.
Changing a Service Profile Setting
Tochangeasettinginaserviceprofilewithoutremovingtheprofile,usethesetservice‐profile
commandforthesettingyouwanttochange.Donotusetheclearservice‐profilecommand.