Specifications

AP Overview
9-16 Configuring Access Points
short-retry-count 5 Sends a short unicast frame up to five times without
acknowledgment.
soda disable Sygate On Demand Agent (SODA) files are not downloaded
to connecting clients.
ssid-name RoamAbout Uses the SSID name RoamAbout.
ssid-type crypto Encrypts wireless traffic for the SSID.
static-cos disable Assigns CoS based on the QoS mode (wmm or svp) or
based on ACLs.
tkip-mc-time 60000 Uses Michael countermeasures for 60,000 ms (60 seconds)
following detection of a second MIC failure within 60
seconds.
transmit-rates
802.11a:
• mandatory:
6.0,12.0,24.0
• beacon-rate:
6.0
• multicast-rate:
auto
• disabled: none
• 802.11b:
• mandatory:
1.0,2.0
• beacon-rate:
2.0
• multicast-rate:
auto
• disabled: none
802.11g:
• mandatory:
1.0,2.0,5.5,11.0
• beacon-rate:
2.0
• multicast-rate:
auto
• disabled: none
Accepts associations only from clients that support one of
the mandatory rates.
Sends beacons at the specified rate (6 Mbps for 802.11a,
2 Mbps for 802.11b/g).
Sends multicast data at the highest rate that can reach all
clients connected to the radio.
Accepts frames from clients at all valid data rates. (No rates
are disabled by default.)
user-idle-timeout 180 Allows a client to remain idle for 180 seconds (3 minutes)
before MSS changes the client’s session to the
Disassociated state.
Table 9-2 Defaults for Service Profile Parameters (continued)
Parameter Default Value Radio Behavior When Parameter Set To Default Value