Specifications

Configuring a Mobility Domain
RoamAbout Mobility System Software Configuration Guide 7-3
Configuring Member RoamAbout Switcheson the Seed
ToconfigurethelistofmembersontheMobilityDomainseedfordistributiontoothermember
RoamAboutswitches,usethefollowingcommandonthe seedRoamAboutSwitch:
set mobility-domain member ip-addr
Examples
ThefollowingcommandsaddtwomemberswithIPaddresses192.168.12.7and192.168.15.5toa
MobilityDomainwhoseseedisthecurrentRoamAboutSwitch:
RBT-8100# set mobility-domain member 192.168.12.7
success: change accepted.
RBT-8100# set mobility-domain member 192.168.15.5
success: change accepted.
EachcommandaddsamemberidentifiedbyitsIPaddresstothelistofMobilityDomain
members.IftheRoamAboutSwitchfromwhichyouenterthecommandisnotconfiguredasa
seed,thecommandisrejected.
Configuring a Member
ToconfigureamemberRoamAboutSwitchintheMobilityDomain,youenterthefollowing
commandwhenloggedintothenonseedmemberRoamAboutSwitch:
set mobility-domain mode member seed-ip ip-addr
ThiscommandconfigurestheIPdestinationaddressthatthememberRoamAboutSwitchuses
whencommunicatingwiththeseedRoamAboutSwitch.
Example
ThefollowingcommandconfiguresthecurrentRoamAboutSwitchasamemberoftheMobility
Domainwhoseseedis192.168.253.6:
RBT-8100# set mobility-domain mode member seed-ip 192.168.253.6
success: change accepted.
ThiscommandsetstheRoamAboutSwitchasamemberoftheMobilityDomaindefinedonthe
seeddeviceattheidentifiedaddress.IftheRoamAboutSwitchiscurrentlypartofanother
MobilityDomainorusinganotherseed,thiscommandoverwritesthatconfiguration.Afteryou
enterthiscommand,thememberRoamAboutSwitch
obtainsanewlistofmembersfromitsnew
seed’s IPaddress.