Specifications
IP Interfaces and Services Configuration Scenario
5-30 Configuring and Managing IP Interfaces and Services
IP Interfaces and Services Configuration Scenario
ThisscenarioconfiguresIPinterfaces,assignsoneoftheinterfacestobethesystemIPaddress,
andconfiguresadefaultroute,DNSparameters,andtimeanddateparameters.
1. ConfigureIPinterfacesontherbt_mgmtandroamingVLANs,andverifytheconfiguration
changes.Typethefollowingcommands:
RBT-8100# set interface rbt_mgmt ip 10.10.10.10/24
success: change accepted.
RBT-8100# set interface roaming ip 10.20.10.10/24
success: change accepted.
RBT-8100# show interface
* = From DHCP
VLAN Name Address Mask Enabled State RIB
---- --------------- --------------- --------------- ------- ----- --------
1 default 10.10.10.10 255.255.255.0 YES Up ipv4
2 roaming 10.20.10.10 255.255.255.0 YES Up ipv4
2. ConfiguretheIPinterfaceontheroamingVLANtobethesystemIPaddressandverifythe
configurationchange.Typethefollowingcommands:
RBT-8100# set system ip-address 10.20.10.10
success: change accepted.
RBT-8100# show system
============================================================================
Product Name: RBT-8100
System Name: RBT-8100
System Countrycode: US
System Location:
System Contact:
System IP: 10.02.10.10
System Idle Timeout:3600
System MAC: 00:0B:0E:00:04:0C
License: unlimited
============================================================================
Boot Time: 2000-03-18 22:59:19
Uptime: 0 days 01:12:02
============================================================================
Fan status: fan1 OK fan2 OK fan3 OK
Temperature: temp1 ok temp2 ok temp3 ok
PSU Status: Lower Power Supply DC ok AC ok Upper Power Supply missing
Memory: 156.08/496.04 (31%)
Total Power Over Ethernet : 105.6
===============================================================================